Packard Bell EasyNote NS11HR Service Manual page 63

www.packardbell.com
18
If your new keyboard already includes the keyboard frame, go to
If you need to use the keyboard frame from the old keyboard, go to
19
Position the new keyboard on the keyboard frame.
20
Secure the keyboard with the screws removed in
21
Lay the keyboard down and insert the keyboard cable to its system board
connector, and then close the clip to lock the cable in place.
Important
The keyboard cable is correctly oriented if it is not twisted.
22
Flip the keyboard over and press it down on all sides until it snaps into place.
23
Close the LCD panel and turn the notebook over so the base is facing up.
24
Secure the keyboard frame with the screws removed in
25
Reinstall the palm rest module by performing
the palm rest module"
26
Reinstall the optical drive by performing
the optical drive"
27
Reinstall the hard drive by performing
hard drive" procedure on
28
If you have disconnected any wireless antennas, reconnect them now.
29
Reinstall the bay cover.
30
Reinstall the battery.
procedure on page
procedure on page 46.
page 41.
step 16.
step
steps 14 – 17 of the
48.
steps 10 and 11 of the
steps 8 and 9 of the
step 21.
step 19.
8.
"Replacing
"Replacing
"Replacing the
57