Table of Contents
Advertisement
14
Carefully pull the system board out of the base enclosure, and then flip it
over (1).
15
Disconnect the DC-input cable from its system board connector (2), and then
remove the system board (3).
Discrete model
16
Remove the cooling assembly by performing
the cooling assembly"
17
If your new system board does not include a processor, remove the
processor from the old system board and install it on the new system board
by performing
page
73.
18
Reinstall the cooling assembly by performing
the cooling assembly"
19
Place the new system board in the base enclosure and secure it with the
screw removed in
20
Reconnect the DC-input, LCD and USB board cables to their system board
connectors.
21
Reinstall the USB board by performing
USB board"
22
Reinstall the Bluetooth module by performing
Bluetooth module"
23
Reinstall the keyboard by performing
keyboard"
24
Reinstall the palm rest module by performing
the palm rest module"
25
Reinstall the optical drive by performing
the optical drive"
26
Reinstall the hard drive by performing
hard drive"
27
If you have disconnected any wireless antennas, reconnect them now.
28
Reinstall the bay cover.
29
Reinstall the battery.
www.packardbell.com
procedure on
steps 5
and
6
in the
procedure on
step
13.
procedure on
page
procedure on
procedure on
page
53.
procedure on
procedure on
procedure on
page
UMA model
steps 4
page
70.
"Replacing the processor"
steps 8
page
70.
steps 8
–
9
63.
step 7
page
65.
steps 21
–
24
steps 14
page
48.
steps 10
and
page
46.
steps 8
and
9
41.
–
7
of the
"Replacing
section on
–
11
of the
"Replacing
of the
"Replacing the
of the
"Replacing the
of the
"Replacing the
–
17
of the
"Replacing
11
of the
"Replacing
of the
"Replacing the
69
- Quick Links:
- Bios
- Clearing a Bios Password
Hide quick links:
Advertisement
Table of Contents
