Packard Bell EasyNote NS11HR Service Manual page 89

www.packardbell.com
5
Place the new webcam on the top side of the LCD assembly lid.
6
Reconnect the webcam cable to its board connector.
7
Reinstall the LCD front panel by performing
the LCD front panel"
Make sure the webcam lens is aligned with camera peephole on the LCD
front panel before you secure the panel in place.
8
Reinstall the LCD panel assembly by following the
"Replacing the LCD panel assembly"
9
Reinstall the system board by performing
the system board"
10
Reinstall the keyboard by performing
keyboard" procedure on
11
Reinstall the palm rest module by performing
the palm rest module"
12
Reinstall the optical drive by performing
the optical drive"
13
Reinstall the hard drive by performing
hard drive" procedure on
14
If you have disconnected any wireless antennas, reconnect them now.
15
Reinstall the bay cover.
16
Reinstall the battery.
procedure on page
procedure on page
page 53.
procedure on page
procedure on page 46.
page 41.
steps 6 – 9 of the
79.
steps 13
procedure on page 76.
steps 19 and 20 of the
67.
steps 21 – 24 of the
steps 14 – 17 of the
48.
steps 10 and 11 of the
steps 8 and 9 of the
"Replacing
– 15 of the
"Replacing
"Replacing the
"Replacing
"Replacing
"Replacing the
83