Running The Flash Utility - Packard Bell EasyNote NS11HR Service Manual

Running the Flash utility:

www.packardbell.com
4
Disconnect the USB storage device from the computer.
5
Perform a BIOS flash procedure to update the BIOS firmware.
To run the Flash utility:
1
Rename the BIOS file as "XXXXXXX.FD".
2
Copy the "XXXXXXX.FD" file to a bootable USB device containing the Crisis
Recovery disk files.
3
Turn off the computer.
4
Insert the USB device containing the renamed BIOS file and the Crisis
Recovery disk files to any USB port.
5
Press and hold the
press the power button.
6
Release the Fn +
Fn + Esc keys (this is the BIOS recovery hotkey), then
Esc keys after POST.
29