Table of Contents
Advertisement
www.packardbell.com
7
Detach the mylar tape covering the speaker cable, and then release the
speaker cable from the latches securing the cable.
8
Disconnect the speaker cable from the power button board.
9
Remove the speaker screws, and then remove the speakers.
10
Position the new speakers on the keyboard frame.
11
Secure the speakers with the screws removed in
12
Reconnect the speaker cable to the power button board.
13
Secure the speaker cable on the keyboard frame latches.
14
Cover the speaker cable with mylar tape.
15
Reinstall the keyboard by performing
keyboard"
procedure on
16
Reinstall the palm rest module by performing
the palm rest module"
17
Reinstall the optical drive by performing
the optical drive"
18
Reinstall the hard drive by performing
hard drive"
procedure on
page
53.
procedure on
page
procedure on
page
46.
page
41.
step
9.
steps 21
–
24
of the
steps 14
–
17
of the
48.
steps 10
and
11
of the
steps 8
and
9
of the
"Replacing the
"Replacing
"Replacing
"Replacing the
59
- Quick Links:
- Bios
- Clearing a Bios Password
Hide quick links:
Advertisement
Table of Contents
