Lcd Assembly; Lcd Front Bezel - Packard Bell T19 Disassembly Manual

LCD Assembly

1. Push the Hinge Covers In + Up to release, then remove the Hinge Covers.
2. Push the LCD Assembly all the way open.
3. Remove 2 x E screws and Grounding Cable from the Left LCD Hinge.
4. Remove 2 x E screws and Grounding Cable from the Right LCD Hinge.
5. Take away the LCD Assembly and LCD Data Cables.

LCD Front Bezel

1. Remove four (4) Screw Covers from the LCD Front Bezel.
2. Remove 4 x E screws from the LCD Front Bezel.
3. Unclip the LCD Front Bezel from the LCD Assembly.
Disassembly Manual EasyNote J2 series
Figure 15
Figure 16
Page 9 of 15