Replacing The Microphone - Packard Bell EasyNote NS11HR Service Manual

Replacing the microphone

90
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
by A in step 8
•
frame/palm rest module - base side) - indicated by B in
"Replacing the keyboard"
•
1 black M2×3 (system board)
•
•
2 black M2.5×5 (LCD front panel)
•
To replace the microphone:
1
Complete the steps in
2
Remove the LCD panel assembly by performing
"Replacing the LCD panel assembly"
3
Remove the LCD front panel by performing
the LCD front panel"
4
Remove the LCD panel by performing
panel" procedure on
or Non-marring plastic scribe
5 black M2×3 (keyboard frame - top base side) - Indicated
of the "Replacing the keyboard"
procedure on
4 black M2.5×6 (LCD panel hinges)
4 chrome M2.5×4 (LCD panel)
"Preparing the notebook" on page
procedure on
page 84.
procedure on
13 black M2.5×6 (keyboard
page 53
steps 2
procedure on page
steps 3 – 5
page 79.
steps 4 – 7 of the "Replacing the LCD
page 53
step 8 of the
37.
– 12 of the
76.
of the "Replacing