Packard Bell EasyNote NS11HR Service Manual page 53

www.packardbell.com
5
If your new optical drive already has it's own bracket and bezel, go to
If you need to use the bezel and bracket from the old optical drive, perform
steps 6 – 9 as necessary.
6
Detach the bezel from the old optical drive.
7
Remove the screw that secures the optical drive bracket, and then detach
the bracket from the drive.
8
Attach the bezel to the new optical drive.
9
Attach the bracket to the new optical drive and secure it with the screw
removed in step
10
Slide the new optical drive into the drive bay and make sure it's properly
engaged to the ODD1 connector.
11
Secure the new drive to the system board with the screw removed in
12
Reinstall the battery.
7.
step 10.
step 3.
47