Connection To Medical Administrator - Barco MediCal Pro Installation & User Manual

Note:
Prior to connecting the viewing station to the MediCal Administrator
server, the medical facility to which the viewing station belongs, must
be added already to MediCal Administrator. For more information,
please consult your system administrator.
If you do not have MediCal Administrator installed on the network,
select No and continue. Should Administrator be installed later, you
can still connect to it from within MediCal Pro.
Please proceed with "Setting up the configuration" on page 29 .
If you have MediCal Administrator installed, select Yes to continue.
MediCal Pro will start a Wizard to set up the server. Please proceed
with "Connection to MediCal Administrator" on page 26.

Connection to MediCal Administrator

1 The Wizard starts with the Welcome page. To proceed with the
connection, select Yes and click on Next.
2 Enter the name of the network server on which MediCal Administrator
runs. Click on Next.
First installation 26