Table of Contents
Advertisement
Info
Display Number
Software Number The order number of the display's internal software
Software version The version of the display's internal software (BARCO
Lifetime
Scan Mode
Miscellaneous
Orbiter
Powersave
Remote Address
Remote Timeout
Imaging board properties
Using MediCal Pro
The order number of the display
(BARCO displays only)
displays only)
The time (in hours) the display has been operating so
far (BARCO displays only)
The scan mode, internally selected from the display's
memory (BARCO displays only)
Check this option to switch on the Orbiter. The option
is grayed if not applicable to the selected display.
Check this option to switch on the Power Saving util-
ity (DPMS). The option is grayed if not applicable to
the selected display.
The internal address of the selected display (BARCO
displays only). Each display connected to the same
computer must have a different address.
The addresses must be set with the display's internal
controls.
The time after which the display interrupts communi-
cation with the computer should the computer not
respond anymore (e.g., is "crashed").
Applicable to BARCO displays only.
98
Advertisement
Table of Contents
