Table of Contents
Advertisement
2
First Installation
2.1 Overview
If you install MediCal Pro on a medical viewing station for the first time,
you should go through the steps listed below.
These steps are just listed here, as an overview of the complete
installation. They are described in detail further in this chapter.
1
Install the hardware components or check the installation of the
hardware:
- Video connection
- Address setting (Barco CRT displays only)
- Data connection (Barco CRT displays only)
- Optical sensor connection (if applicable)
See § Installation of the hardware on page 21.
2
Install the MediCal Pro software. On Windows 2000 Professional and XP
Professional: Restart the computer after installation.
See § MediCal Pro installation on page 23.
3
Start MediCal Pro
If appropriate, connect to MediCal Administrator.
See § Starting up for the first time on page 24.
First installation
18
Advertisement
Table of Contents
