2.3 MediCal Pro installation
Minimum System requirements
•
Operating system: Windows 2000 Professional/Windows XP
Professional/Windows Server 2003 Standard Edition (32-bit)
•
Memory: 128 MByte
•
Free disk space: 50 MByte
•
Internet Explorer 4.0
Before installing MediCal Pro
1 You must have Administrator privileges to install the software.
2 Read the Release Note for the most recent information.
What if an earlier version of MediCal Pro is installed
•
If MediCal Pro 2.02 or lower is installed, remove it before installing
the new version. Please refer to the § "Uninstalling MediCal Pro",
further in this chapter.
•
If MediCal Pro 2.03 or higher is installed, there is no need to uninstall
it. Simply follow the guidelines below.
•
Note: MediCal Pro 2.05 contains a new task for Barco Coronis displays:
Auto Calibration. If you install V. 2.05 while a lower version is
installed, you must manually add the new task. See "Adding tasks" on
page 76. After this, make sure to check if the trigger settings for
"transparent intervention-free" Q/A tasks are properly set. See §
Defining the Q/A task trigger settings on page 59.
Installing MediCal Pro
To install MediCal Pro, enter Windows and follow these steps:
1 Exit all open programs.
2 Insert the CD-ROM containing the MediCal Pro installer program in the
CD-ROM drive.
3 The CD-ROM starts automatically. After a few seconds, the MediCal Pro
welcome window appears.
4 Click on Install. The Setup application starts.
5 Click on the Next> button.
6 Read the License agreement on the screen very carefully. Scroll down
to read the complete text.
7 Click on Yes if you agree with the License agreement and wish to
continue with the installation.
8 In the Customer information window, fill in the user name, company
name, and serial number of MediCal Pro. You can find the serial
number on the CD-ROM jewel case. Click on Next>.
9 A window appears, indicating the directory where MediCal Pro is
going to be installed.
First installation
23