Table of Contents
Advertisement
12 Configuration setup complete
The Wizard is completed. Select Finish to return to the main window.
The display icons are now filled in in the main window's Configuration
section.
Note: If MediCal Pro was installed for CRT displays and the Wizard has
now detected only Barco flat panel displays, a message appears, asking
you to disable the Uniformity task for the flat panel displays. We advise to
select Yes because the uniformity task is not needed for flat panels.
This message appears only if the Measure Uniformity task is loaded into
the QA check schedule.
Now the Barco CRT displays must be aligned (if necessary), the presets
must be defined, and the displays must be calibrated. Please proceed
with the next chapter, "Aligning the displays".
Solving Configuration Setup Wizard search errors
The Wizard returns a search error in case you make clear that the Wizard
has not found all Barco displays that should be connected.
First installation
40
Advertisement
Table of Contents
