Table of Contents
Advertisement
4 If the system contains no Barco flat panel displays, nor Barco CRT
displays connected to the USB bus, MediCal Pro will notice that there
is no configuration set up in the program yet. It will ask if you want to
log in as Advanced user, to set up the configuration.
Note: Barco Nio Fusion and Color Nio displays are not automatically
detected at start-up. You should also add them by following the
procedure described further.
5 If you select Yes, MediCal Pro opens the Log in window because you
have to be advanced user to set up the configuration.
In the User Password box, enter "advanced".
6 Select OK.
7 If the system contains Barco flat panel displays, the detected displays
are mentioned in a message box.
Click on Add Now to proceed and add the displays to the
configuration. Click on Cancel to proceed without adding the displays.
8 Choose whether or not you wish to connect to MediCal Administrator.
First installation
25
Advertisement
Table of Contents
