Table of Contents
Advertisement
Note:
When a display is removed from the configuration, the task histories
related to that display will no longer be visible in MediCal Pro.
However, the histories are not deleted. When you connect the same
display again, the histories will be visible as well.
3.8 Connecting to MediCal Administrator
When MediCal Pro starts up for the very first time, it provides the
opportunity to connect to a server on which MediCal Administrator is
installed. If MediCal Pro is not yet connected to a MediCal Administrator
server, it is still possible to do this in the program.
Note:
Prior to connecting the viewing station to the MediCal Administrator
server, the medical facility to which the viewing station belongs, must be
added already to MediCal Administrator. For more information, please
consult your system administrator.
To connect to MediCal Administrator:
1 From the Tools menu, select Administrator Connection.
2 The MediCal Administrator Connection Wizard starts. Please refer to
the chapter "First Installation" for a detailed description of this Wizard.
3.9 Registering the operations in a log file
MediCal Pro stores the results of the Q/A checks in a log file, and if it
is connected to a MediCal Administrator server, it sends the result data to
MediCal Administrator.
Apart from these methods of logging, MediCal Pro can keep track of all
the operations the users perform in the program.
This file, called log, is stored on the hard disk in the MediCal Pro program
folder. It can be opened with any text editor.
This registration can be switched on or off.
To select / deselect logging:
1 From the Tools menu, select Options > Application Settings.
Using MediCal Pro
91
Advertisement
Table of Contents
