Table of Contents
Advertisement
7 Remaining imaging board head
The Wizard allows to logically link a non-Barco display to each remaining
imaging board head.
The Wizard makes a suggestion of the head to link the display to by
inverting the colors of the character in the display's lower right corner.
Select Yes if the display is really connected to this head (with video
cables). Click on Next. The Wizard proceeds.
Select No if you do not want to add the display to that head.
Click on Next. The Wizard continues with only the Barco display(s) added.
In case no Barco displays were added at all, the Wizard exits.
First installation
36
Advertisement
Table of Contents
