Table of Contents
Advertisement
Important:
Make sure there are no application windows or other items (e.g., the
cursor) displayed under the sensor. They would cause the calibration
to fail.
When ready, click on OK.
3 For sensors that have an ambient light shielding only: If the Ambient
Light Compensation option in the Preset is checked, the software asks
you to remove the sensor from the screen and put it back without
Ambient Light Shield.
When ready, click on OK.
After a few measurements, the software asks to remove the sensor
once more, and put it back with the Ambient Light Shield.
4 When ready, click on OK.
5 When the calibration is finished successfully, it displays the following
message.
Click on OK to close the window.
Using MediCal Pro
70
Advertisement
Table of Contents
