Table of Contents
Advertisement
•
Check the communication port to which the display is connected.
•
Select the Remote Address number corresponding to the display's
remote address.
•
Click on Identify to see which display is connected to which head.
For a few seconds, you will see the letter of the heads on the displays.
They automatically disappear after a few seconds.
•
Click on Show display to see which display corresponds to the
Address
The image of the selected display will blink for a few times.
c) Select the No Link tab if you want to add a non-Barco display.
Enter the brand name, type and serial number. Also, you have to
indicate whether the display is a grayscale display or not, and a CRT or
flat panel display.
Note: It is important to enter the correct data here, so that the display
can be found quickly should a task on this display generate an error in
MediCal Administrator.
Removing a display
To remove a display, right-click on the display icon and select Remove
Display... from the drop-down menu.
The display is removed immediately.
Using MediCal Pro
chosen from the drop-down list.
Remote
90
Advertisement
Table of Contents
