Table of Contents
Advertisement
Enter the desired white and black luminance, expressed in cd/m² or fl,
depending on the application settings.
11 Calibration
You can choose to calibrate the displays and possibly run a QA check on
the displays after finishing the Wizard.
The Q/A check option can be checked only if the Calibrate option is
checked.
We advise not to check either of these options at this time, because the
displays have to be aligned (CRT displays only) after the configuration
setup, and the presets still have to be defined or edited.
If you check one or both options, they will be executed after completion
of the Wizard.
First installation
39
Advertisement
Table of Contents
