Clear Commands Summary Table - Avaya P333T User Manual

no rmon event
Use the no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event <Event Index>
hostname
Use the hostname command to change the Command Line Interface (CLI)
prompt. The current switch number always appears at the end of the prompt.
The syntax for this command is:
hostname [<hostname_string>]
hostname_string
Note: If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.

Clear Commands Summary Table

Following is a Table of the Privileged Level clear commands.
• clear timezone
• clear ip route
• clear snmp trap
• clear vlan
• clear dynamic vlans
• clear port static-vlan
• clear cam
• clear log
• clear port mirror
• clear secure mac
Avaya P333T User's Guide
none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
Returns the timezone to its default, UTC.
Clears IP routing table entries.
Clears SNMP trap on the system.
Clears VLAN entries.
Clears dynamic VLAN entries.
Clears a VLAN statically configured on a
port.
Clears all the CAM entries.
Clears the Log entries of a switch.
Cancels port mirroring.
Clears a MAC address.
Chapter 6 CLI – Layer 2
Page 84
Page 84
Page 84
Page 85
Page 85
Page 86
Page 86
Page 86
Page 86
Page 87
83