Avaya P333T User Manual page 105

• set port disable
• set port speed
• set port duplex
• set port name
• set port trap
• set port vlan
• set port vlan-binding-
mode
• set port static-vlan
• set port self-loop
discovery
Admin_Status
• set port channel
• set port classification
• set port redundancy
on/off
• set port redundancy
• set internal buffering
• set boot bank
• set intermodule port
redundancy
• set intermodule port
redundancy off
• set port mirror
• set port spantree
• set port spantree
priority
Avaya P333T User's Guide
Administratively disables a port.
Sets the speed for a 10/100 port.
Sets the duplex mode of a port.
Assigns a name to a port.
Enables/disables the SNMP up/down
link traps sent for port.
Assigns the Port VLAN ID (PVID).
Defines the port binding method.
Defines a multiple VLANs per port.
Defines a port's IBM token ring
discovery mode.
Defines a LAG interface.
Defines port classification.
Defines/deletes a link redundancy
entry.
Enables/disables all the defined link
redundancy schemes.
Sets internal buffering capacity to
maximum/minimum.
Configures the boot bank from which
the switch will boot.
Defines the stack's unique fast
redundancy scheme.
Clears the intermodule redundancy.
Sets a port mirroring source-destination
pair in the stack.
Enables or disables the spanning tree for
switch ports.
Sets the port spantree priority level.
Chapter 6 CLI – Layer 2
Page 100
Page 101
Page 101
Page 102
Page 102
Page 102
Page 103
Page 103
Page 104
Page 104
Page 105
Page 106
Page 106
Page 107
Page 107
Page 108
Page 108
Page 109
Page 109
Page 110
89