Test Design Error Messages; Phase 1 Error Messages - Avaya Call Management System Custom Reports

Test Design Error Messages

Test design error messages are divided into three categories:
Phase 1 Error Messages (detected before the sample input screen is displayed)
Phase 2 Historical Error Messages (require the sample input before occurring)
Phase 2 Real-Time Error Messages (require the sample input before occurring).

Phase 1 error messages

Test design error messages contains Phase 1 error messages. The following table lists the
messages alphabetically and includes a cause and a recommended solution for each
message.
Phase 1 error messages
Message:
Cause:
Solution:
Message:
Cause:
Solution:
Message:
Cause:
Solution:
$<variable name> not defined
The "where" clause contains a variable that is not defined.
Define the variable using the define input action or remove
the variable from the row search criteria.
Cannot mix aggregates and nonaggregates in the select
You specified both aggregate columns and nonaggregate
columns in the same select for real-time reports.
Create two identical row search conditions and apply one to
the aggregate columns and one to the nonaggregate
columns.
Cannot use the SYN function for order by
You tried to use a synonym to sort the output.
Remove the SYN aggregate from the Order by field.
Test Design Error Messages
Issue 3.0 May 2002 119