Entering Report Text - Avaya Call Management System Custom Reports

4. Move the cursor to the new position for the upper left corner of the block, and press
Return
All fields and text within the block are copied to the new location.
When you copy a block, the block's text or fields cannot overlap any other text or fields. If
you do try to copy a block to a location where it will overlap existing text or fields, an error
message displays in the status line.

Entering report text

You can enter text on Screen Painter to label your fields, enter a report title, or include
special instructions for the report. You should normally enter text to label each data field so
that when you run the report you will know what data the field is showing.
You should enter text before defining the data fields for two reasons:
The text provides a skeleton layout to help you position your data fields.
The text helps you remember what each data field represents. If you have to change
fields, this text saves you time.
To enter text, simply position the cursor where you want the text and type the characters.
You can use the space bar to create spaces and to delete text. You can also simply
overtype existing text with new text.
Note:
To delete large portions of text, use the Erase block action list option (see
block on page 49.
.
You cannot overtype a data field.
Entering report text
Erasing a
Issue 3.0 May 2002 53