Assign A Row Search Id To Report Fields And Bars - Avaya Call Management System Custom Reports

Assign a row search ID to report fields and bars

To complete the definition of data for a field or bar, you must assign a row search ID to the
field/bar. Use the following steps to do this.
Note:
1. On Screen Painter, place the cursor on a field to which you want to assign a row
search ID. To assign a row search ID to several fields at one time, place the cursor in a
position from which you can define an appropriate block.
2. Select the Row search action list option.
The Row Search window is displayed.
3. Enter the wanted row search ID and select the Find one action list option.
The row search conditions for the ID are displayed.
4. Select the Assign fields action list option.
The Row Search window closes, the cursor moves to its original position Move
cursor to define a block and press RETURN is displayed on the status line.
5. Move the cursor using the
one or more characters of a field/bar, CMS assigns the row search ID to that field/bar.
The cursor defines a block on your terminal in inverse video (or color).
6. Press
The ? in each field/bar changes to the row search ID to indicate the row search
conditions have been assigned. Additional characters fill the field or bar as shown in
the following figures.
If a field already has an assigned row search ID (for example, a field that is
part of a design you have copied), you must first remove the existing row
search ID assignment. See
page 105.
.
Return
Changing the row search-field assignment
, , or arrow keys. If the block you define contains
Tab Shift Tab
Defining the rows of data for a report
Issue 3.0 May 2002
on
101