Avaya




4620 User Manual page 26

Making Calls
2. Press the Line/Feature button associated with the number you want to
redial.
If the call can be dialed, the Phone application screen displays and the
selected number dials automatically.
If the selected number cannot be dialed (for example, if all call appearance
lines are currently on Hold), all Redial entries are disabled. If you press a
number for redialing while in this state, an error beep tone sounds and no
further action occurs.
3. Proceed with the call.
A Call Log entry is created for this call.
Dialing a party using a Speed Dial button
Automatic dialing of pre-stored numbers is the most common method of automatic
dialing. You can set up Speed Dial buttons and select the party you want to call by
pressing that button. For information on setting up Speed Dial buttons, see
the Speed Dial
capabilities that allow up to 108 speed dial entries, speed dialing as described in
the following procedure is convenient and efficient.
1. Press the SpDial softkey at the bottom of the display screen.
The first twelve Speed Dial buttons display, one name/number per button,
and the prompt "Select entry to dial." appears at the top of the display area.
2. If the party you want to call appears on the display, proceed to Step 3. If the
party you want to call is not shown, press the Page Right (
display the next page of entries, continuing until the number/party you want
displays. You can also press the Page Left (
preceding page of entries.
3. Press the Line/Feature button associated with the name/number of the
person you want to call.
The number of the selected person dials automatically.
4. Pick up the handset, activate the headset, or use the Speakerphone to
proceed with the call.
5. Hang up the handset, deactivate the headset, or press the Speakerphone
(
2-4
Issue 1.8 June 2003
Application. Because of the 4620 IP Telephone's advanced
) button to end the call.
Using Your 4620 IP Telephone
Using
) button to
) button to display the