Power Cycling The Phone - Avaya




4620 User Manual

Telephone Management and Troubleshooting
3. Choose one of the following:
If you want to
Reset the phone without
resetting any assigned
values
Reset the phone and any
previously assigned
(programmed) values
(Use this option only if your
phone has programmed,
static values)
4. Press # to restart the phone or * to terminate the restart and restore the
phone to its previous state.
NOTE:
Any reset/restart of your phone may take a few minutes.

Power Cycling the Phone

Use the power cycle with your System Administrator's approval only if the basic or
programmed reset procedure cannot be performed or does not correct the
problem:
1. Unplug the phone and plug it back in.
The phone connection is re-established.
2. If power-cycling does not correct the problem, your System Administrator
can perform a more severe power cycle routine by unplugging both the
phone and the Ethernet cables.
!
WARNING:
Because the type of power cycle mentioned in Step 2 involves
reprogramming certain values, it should only be performed by your
System Administrator.
Resetting and Power Cycling the IP
Then
Press * (asterisk).
A confirmation tone sounds and the
display prompts "Restart phone? * = no #
= yes."
Press # (the pound key).
The display shows the message
"Resetting values" while your IP
Telephone resets its programmed values,
such as the IP address, to its default
values, and re-establishes the connection
to the server. The display then prompts
"Restart phone? * = no # = yes."
Issue 1.8 June 2003
Telephone
8-9