Table of Contents
Advertisement
!
!
The MCV touch panel does not support non-interlaced video sources, this includes:
NTSC and PAL video formats.
HUE and SATURATION do not appear on the Video Setup page if the incoming video
signal is PAL format.
Use the Video Setup page to set the incoming video display on the touch panel.
Video window button types
Select
VIDEO WINDOW
page to a video window that displays the incoming video signal. The button type
and associated options appear in the Button Properties page. This sets the button to display an
incoming video signal; only one video input source is available.
If a touch panel is video capable, the incoming signal is displayed through a button,
while graphics are displayed as a background color option on the page.
Video joystick button types
This feature sets the selected button to Video Joystick that displays the incoming video signal and a
control stick. The button type
Properties page. When you move the control stick, the touch panel sends data to the Central
Controller and to the external device to perform a pre-programmed operation, depending on the slot
attribute.
If the touch panel is video capable, the video signal is displayed behind the on-screen
joystick.
!
G3 Firmware Design and Reference
SATURATION sets the color saturation (density) of the input video. Press
increase or decrease the saturation level of the input video. The saturation range is from
0-255. You can also press
default).
HUE sets the color gradation of the input video. Press
the hue level of the input video. The hue range is from 0-255. You can also press
to set the hue level to 128 (factory default).
DEFAULT
from the Button Type menu to set the selected button on the touch panel
• BUTTON OPTIONS opens the BUTTON OPTIONS menu that lets you assign the video
input slot to view on this button.
• SLOT 1 sets the button to view the video from input slot 1.
• SLOT 2 sets the button to view the video from input slot 2.
• SLOT 3 sets the button to view the video from input slot 3.
VIDEO JOYSTICK
BUTTON OPTIONS opens the
set the joystick button type. Press
changes.
• JOYSTICK NON-CENTER sets the button to a 4-quadrant joystick with a control stick. When
you move the control stick, the touch panel sends data to the Controller and to the external
device to perform a pre-programmed operation. When you release the mouse button (or other
touch device), the control stick and external device stay in that position.
to set the color saturation to 128 (factory
SET TO DEFAULT
and associated options appear in the Button
JOYSTICK BUTTON OPTIONS
to close the menu and exit without saving
ABORT
Editor and Setup Reference
or
UP
or
to increase or decrease
UP
DN
VIDEO WINDOW
menu. Use this menu to
to
DN
SET TO
51
Advertisement
Table of Contents
