Horizontal Bargraph Button Types - AMX G3 Firmware Instruction Manual

FIG. 28 BUTTON OPTION menu - Vertical Bargraph
!

Horizontal bargraph button types

This feature sets the button to a horizontal bargraph or slider. Select HORIZONTAL BARGRAPH
from the Button Type menu to set the selected button to Horizontal Bargraph. The button type
HORIZONTAL BARGRAPH and associated options appear in the Button Properties page. The
button type HORIZONTAL BARGRAPH and the following options appear in the Button
Properties page:
G3 Firmware Design and Reference
• BUTTON OPTIONS opens the BUTTON OPTION menu where you set the button type.
Press ABORT to close the menu.
• BARGRAPH DISPLAY sets the bargraph as a vertical indicator for external devices.
Indicator levels must be defined in the Axcess software program.
• BARGRAPH ACTIVE sets the bargraph as a vertical controller for external devices.
Indicator levels must be defined in the Axcess software program. When a control level is set
on the vertical bargraph, control data is sent to the Central Controller to control an external
device.
• BARGRAPH CENTERING sets the bargraph as a vertical controller with a default control
level. Levels must be defined in the Axcess software program. When a control level change
is sent to the Central Controller, the external device changes accordingly until the control
data input stops. Then the control level on the vertical bargraph returns to the default
position and the external device returns to a default control position.
• SLIDER DISPLAY sets the slider as a horizontal status indicator for external devices. Levels
must be defined in the Axcess software program.
• SLIDER ACTIVE sets the slider as a controller for external devices. Control levels must be
defined in the Axcess software program. When a control level is set on the vertical
bargraph, data is sent to the Central Controller to control an external device.
• SLIDER CENTERING sets the slider as a horizontal controller with a default control level.
Control levels must be defined in the Axcess software program. When a control level
change is sent to the Central Controller, the external device changes accordingly until the
control data input stops. Then the control level on the bargraph returns to the default
position and the external device returns to its default control position.
• BATTERY VOLTAGE sets the button to show the voltage level of the battery (if equipped).
This is useful when needing an on-screen indicator of the available battery charge.
STRING/MACRO opens the keyboard where you enter the data string to be sent to the
Central Controller via AXlink or RF communications. The data string appears in the
STRING button. Press ABORT to close the menu.
• BUTTON OPTIONS opens the BUTTON OPTION menu where you set the button type.
Press ABORT to close the menu.
Editor and Setup Reference
47