Introduction; Overview; Minimum System Requirements; Axcentwire Program File - AMX AXCENTWire Instruction Manual

System wiring documentation program

Table of Contents

Introduction

AXCENTWire is a Windows application used for wiring documentation for

AXCENT and AXCENT 2 systems, and AXB-EM-232, AXB-REL8, AXB-VOL3, AXB-

232+, and AXB-IRS4 devices. The Panja AXCENTWire program helps you manage

complex hardware configurations and allows you to save, recall, and print the files

you develop.

You can use AXCENTWire with any IBM PC (or compatible) running Microsoft

Windows. The program uses the Windows operating system to build and manage

your AXCENTWire files. Depending on the computer's storage capacity, you can

store the files for hundreds of different AXCENTWire configurations.

Your computer must have a minimum of 4 MB of memory (RAM) or higher.

The executable AXCENTWire program file is AXCENTW.EXE. In order to use the

AXCENTWire program, you should be familiar with the conventions of the MS-

DOS operating system and Microsoft Windows.

The AXCENTWire program is available on the Panja Control Disc (CD-ROM).

Follow the instructions provided with your Control Disc to install the

AXCENTWire program. If you follow the typical setup procedure, AXCENTWire

will be installed along with the other Panja software provided on the Control Disc.

Alternatively, you can select to install only AXCENTWire by deselecting all other

programs in the Select Components dialog box.

When you run the AXCENTWire program, you see a template window similar to

the one shown in Figure 1. All of the AXCENTWire functions are displayed and

processed from this main screen.

AXCENTWire System Wiring Documentation Program

Introduction

Table of Contents