AMX G3 Firmware Instruction Manual page 32

Editor and Setup Reference
!
!
28
The
OUTPUT RESOLUTION
!
The button shows the current firmware version installed in the touch panel.
X.XX
V
The button shows the serial number for the touch panel.
SERIAL #
SLOT SETUP (AXB-TPI/3) opens a video setup options page for Slot 1. This button
opens up the video properties for the first card detected in Slot 1 (FIG. 12) that lets you
set various characteristics for the video signal being routed through Slot 1. This page
addresses the properties for Slot 1. Other slots have their own RGB Setup page. This
page can also be the RGB Setup page depending on what the arrangement of the cards
are in the AXB-TPI/3 (TPI/3). Refer to the Video window button types section on page 51
for more information on this features of this page.
FIG. 12 AXB-TPI/3 Video Setup options page
SET BRIGHTNESS sets the LCD brightness and contrast levels for a touch panel.
When the panel is attached to an optional battery source, a
information button appears on the lower right-hand side of the screen. This
SETTINGS
message appears to suggest brightness settings for a longer battery life. Press the UP/DN
buttons to set the LCD brightness and contrast on the touch panels. The following table
lists the different touch panel types and the corresponding brightness and contrast ranges.
Touch Panel Brightness and Contrast Ranges
Panel Types
AXB-TPI/3 Touch Panel Interface
10.4" Color-Active LCD Touch Panels
8.5" Black/White LCD Touch Panels
8.5" Color-Passive LCD Touch Panels
8.5" Electroluminescent LCD Touch Panels
6.0" Color Video Wall Touch Panel (CV6)
5.5" Black/White LCD Touch Panels
5.5" Color-Active LCD Touch Panels
5.5" ViewPoint Wireless LCD Touch Panels
4.0" Color-Passive LCD Touch Panels (CP4)
Black/White touch panels show black, white, and transparent buttons in place of the color
palette shown on all color LCDs. The EL+ and TPI/3 panel types do not have a Set
Brightness button on their Setup page.
button shows the screen resolution.
LOWER BRIGHTNESS
Brightness
Range
N/A
1-8
1-7
1-8
N/A
1-8
1-10
1-8
1-5
1-8
G3 Firmware Design and Reference
Contrast
Range
N/A
N/A
1-15
1-25
N/A
N/A
1-30
N/A
1-12
1-12