AMX G3 Firmware Instruction Manual page 48

For touch panel design and reference

Hide thumbs Also See for G3 Firmware:

Table of Contents

Editor and Setup Reference

FIG. 23 BUTTON OPTION menu

FIG. 24 PAGE FLIP TYPE menu

• NONE sets the button feedback to Off. This option also sets the button border, fill, and text

colors to match the CHANNEL OFF color palette in the PROPERTIES page.

• CHANNEL sets the button border, fill, and text colors to match the CHANNEL ON color

options in the Attributes page when the assigned button function is on.

• INVERTED CHANNEL sets the button border, fill, and text colors to match the CHANNEL

ON color options in the Properties page when the assigned button function is Off.

• GREY CHANNEL sets button feedback color to grey.

• ALWAYS ON sets the button feedback On. This option also sets the button border, fill, and

text colors to match the CHANNEL ON color options in the PROPERTIES page.

• MOMENTARY sets the button border, fill, and text colors to match the CHANNEL ON color

options in the Properties page when you touch the button regardless of the assigned

function.

• BLINK sets the button to toggle between On and Off states.

• ABORT closes the menu and exits without saving changes.

• FLIP POPUP ON sets the button action to open a popup page. Select the FLIP menu

buttons to open the POPUP PAGE menu and select a popup page.

• FLIP POPUP OFF sets the button action to close a popup page. Select the FLIP menu

buttons to open the POPUP PAGE menu and select a popup page to close.

• FLIP PREVIOUS sets the button action to open the previous touch panel page on the panel.

• FLIP STANDARD sets the button action to open a touch panel page. Use the FLIP menu

button to open the PAGE menu and select the target touch panel page.

STRING/MACRO opens the keyboard where you enter the data string to be sent to the

Central Controller via AXlink or RF communications. The data string appears in the

button. Press

STRING

ABORT

allows you to enter on-panel string commands that you can assign to buttons by using the

touch panel editor. Select the

and enter the string command with the Touch Panel keyboard. The control system

to close the menu without saving changes. This feature

option in the Edit bar, press the target button,

PROPERTIES

G3 Firmware Design and Reference

Table of Contents