Altigen Call Detail Reporting Manual page 97

Each location should have the following options set:
a. Path - accept the default value.
b. Time to call: and Next call: fields - these values pertain only to a
buffer box. When the CDR Loader is used, they are ignored.
c. PBX Format - make sure the appropriate PBX format is selected.
d. Buffer Box Type - select the File option.
e. Uncheck Buffer Box adds extra Date/Time stamp to each
record.
3. Follow Steps 1 through 13 of the Setting Up TAPIT and CDR
Loader for the Single Node section above.
4. Click on the Multi Sites button. The MultiSite Settings screen
appears. If this is a new installation this screen is empty.
5. Click on the Con4Mon.ini button. Your default text editor opens the
Con4Mon.ini file. Copy the following settings into this file.
;Reference table to handle multiple nodes:
[Multi_S]
;must be = total/max number of locations used
;(if last S_xxx is S_004 then Max_S=4)
;thiese are a sample entries:
TAPIT CDR Loader
CDR Manual 89