Command Interpreter Mode; Call Control; Figure 15-13 Command Mode - ZyXEL Communications Prestige 128 Plus User Manual

Prestige 128+ ISDN Router

15.7 Command Interpreter Mode

This option allows you to enter the command interpreter mode. A list of valid
commands can be found by typing [help] at the command prompt. For more
detailed information, check the ZyXEL Web site or send e-mail to the ZyXEL
P128plus> ?
Valid commands are:
sys exit
isdn l2tp
ppp bridge
P128plus>
Support Group.

15.8 Call Control

The Prestige provides four call control functions: call control parameters,
blacklist, budget management and call history.
Call control parameters allows you to set a dial out time limit, the number of
times a number should be called before it is added to the blacklist and the interim
between calls.
The budget management function allows you to set a limit on the total outgoing
call time of the Prestige over a period of time. When the total outgoing call time
exceeds the limit, the current call will be dropped and any future outgoing calls
will be blocked.
15-16
Enter Menu Selection Number: 8
device
radius
ipx

Figure 15-13 Command mode

ether
ip
System Maintenance