Figure 4-4 Menu 11.5 - Remote Node Filter - ZyXEL Communications Prestige 128 Plus User Manual

Prestige 128+ ISDN Router
4.1.7 Remote Node Filter
to specify the filter set(s) to apply to the
Use Menu 11.5 – Remote Node Filter
incoming and outgoing traffic between this remote node and the Prestige and to
prevent certain packets from triggering calls. You can specify up to 4 filter sets
separated by a comma, e.g., 1, 5, 9, 12, in each filter field. The default is no
filters.
Note that spaces are accepted in this field. For more information on defining the
filters, see Chapter 9. The Prestige comes with a prepackaged filter set,
NetBIOS_WAN, that blocks NetBIOS packets. You can include this in the call
filter sets if you wish to prevent NetBIOS packets from triggering calls to a
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
remote node.
Figure 4-4 Menu 11.5 – Remote Node Filter
4-12 Remote Node Configuration