Lan-To-Lan Server Application; Figure 8-2 Example Of A Lan-To-Lan Server Application - ZyXEL Communications Prestige 128 Plus User Manual

8.2

LAN-to-LAN Server Application

Your Prestige can also be used as a dial-in server for LAN-to-LAN application to
provide access for the workstations on a remote network. For your Prestige to be
set up as a LAN-to-LAN server, you need to configure the Default Dial-In Setup
to set the operational parameters for incoming calls. Additionally, you must
create a remote node for the router on the remote network (see Chapter 5 -
Remote Node Configuration).
Remote Network
Prestige
An example of your Prestige being used as a LAN-to-LAN server is shown
below.

Figure 8-2 Example of a LAN-to-LAN Server Application

Dial-In Server Configuration
Prestige 128+ ISDN Router
Local Network
LAN-to-LAN
Server
Prestige
8-3