Table of Contents
Advertisement
Chapter 14 Static Route
14.2 The IP Static Route Screen
Click Network > Static Route to open the IP Static Route screen.
Figure 65 Network > Static Route
The following table describes the labels in this screen.
Table 48 Advanced > Static Route
LABEL
Add Static
Route
#
Status
Name
Destination
Subent Mask
Gateway
Modify
Apply
Cancel
148
DESCRIPTION
Click this to create a new rule.
This is the number of an individual static route.
This field indicates whether the rule is active or not.
This field displays a name to identify this rule.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This parameter specifies the IP network subnet mask of the final
destination.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Click the Edit icon to open a screen where you can modify an existing
rule.
Click the Remove icon to delete a rule from the NVG2053.
Click Apply to save your changes back to the NVG2053.
Click Cancel to begin configuring this screen afresh.
NVG2053 User's Guide
Advertisement
Table of Contents
