Error Messages & Exception Condition; Error Conditions - Fluke NetDAQ 2640A User Manual

Introduction
This appendix describes error messages and how NetDAQ Logger handles
exception conditions during operation.
Communications Connection
If the communications connection to an instrument is broken during logging, a
modeless window appears with a warning message, bringing NetDAQ Logger to
the top. NetDAQ Logger continues on with other instruments in a round-robin
fashion and attempts to regain communication with the disconnected instrument
each time around.
Full-Disk
If the disk becomes full during data collection or if the directory structure is
deleted such that attempts to write to the data file fail, subsequent scans are not be
recorded, but communication with the instrument and data display continues. A
modeless window appears with a warning, bringing the NetDAQ Logger
application to the top.
Scan Queue Overflows
If the instrument's scan queue overflows, a modeless window appears with a
warning message.

Error Conditions

Various error conditions in the instrument are checked and reported at the time
communications are opened. Diagnostic messages are displayed if the user enters
Error Messages & Exception
Appendix J
Conditions
J-1.
J-2.
J-3.
J-4.
J-5.
J-1