Fluke NetDAQ 2640A User Manual page 340

2640A/2645A NetDAQ
Users Manual
Accessing NetDAQ Logger commands, 3-3
Accessories, options and, 1-14
Accuracy performance tests, 6-11
Adding an Instrument to the network, 3-5
Adding or Changing the Chart Title, 5-23
Adjusting the Curve Amplitude Scale
(Y-axis), 5-16
Adjusting the Curve Time Scale
(X-axis), 5-15
Alarm
master, 1-10, 2-14
trigger, 1-10
Alarm specifications, master, A-6
Alarm/trigger I/O connections, 2-12
Alarms, 1-8, 3-23
Analog channel integrity test, 6-15
Analog channels
capabilities, 1-7
Assigning channel labels, 3-24
Asynchronous instrument operations, 1-12
Auto rollover, 4-14
—B—
Background Preferences, 5-21
Base channel number, reviewing and setting
the, 2-27
Basic network packet and frame contents, I-6
Binary data files
converting to ASCII, 4-18
—C—
Calibration, 6-31
Capabilities, instrument, 1-4
Channel
labels, 3-24
monitoring, 1-8
Channel equation
defining a computed, 3-20
Channels
analog, 1-7
computed, 1-7
configuring, 3-18
copying, 3-26
numbering, 1-7
2
Channels configuration dialog box, 3-18
Chart Title, Adding or Changing the, 5-23
Chart, Printing a, 5-24
Cleaning, 6-4
Clearing instrument totalizer value, 4-5
Common mode voltage, 2-7
Communications
network, I-2
RS-232, 1-13
Communications configuration dialog
box, 3-5
Computed channel
defining an equation, 3-20
Computed channel integrity test, 6-15
Computed channels, 1-7
defining an equation, E-1
Configuration commands, dimmed, 3-15
Configuration lockout, using, 3-28
Configuration, power-on, 2-21
Configuring alarms, 3-23
Configuring an instrument, 3-15
Configuring analog channel functions, 3-19
Configuring channels, 3-18
Configuring computed channel
functions, 3-20
Configuring Mx+B Scaling, 3-22
Configuring Mx+B scaling from a file, 3-25
Configuring network communications, 3-4
Configuring the Curve Status Display, 5-17
Configuring the netdaq.ini file, 3-29
Configuring the performance test setup, 6-6
Connecting to a power source and instrument
grounding, 2-5
Connections
alarm/trigger I/O, 2-12
digital I/O, 2-11
universal input module, 2-7
Connector set, instrument, 1-15
Controls
front panel, 2-17
rear panel, 2-20
Controls and indicators, 2-15
Converting a data file from Binary to
ASCII, 4-18
Converting data files, 4-18