Table B-1 is a list of the warning and error messages from the Tester. Table B-2 is a list of the warning and error messages
from the Viewer software.
Table B-1. 810 Vibration Tester Warning and Error Messages
Display Message
Invalid RPM
The RPM is out of range (the RPM range is 200 to 12000)
Tachometer not connected
The Tester cannot find the Tachometer. See "How to Connect the Tachometer" and make
the connections.
Tachometer laser not ON
Tachometer laser is off. Push the Tachometer power button to on.
Failed to POWER ON
Power from the Tester is necessary for the Tachometer to operate. Make sure that the cable
Tachometer
connection is good. If the problem continues, contact Fluke for technical support.
Warning and Error Messages
Description
Appendix B
B-1