Default Configuration Settings
When you create a new instrument icon, NetDAQ Logger initializes the settings
for that instrument to the default parameters. (See Table 3-1.)
Table 3-1. NetDAQ Logger Default Instrument Configuration
Parameter
Description:
Group Status:
Trigger Type
Interval 1:
Interval 2:
Reading Rate:
Drift Correction:
Trigger Out:
Duration:
Temperature Units:
Monitor Chan:
Totalizer Debounce:
Data File:
File Comment:
File Mode:
File Rollover:
Low Disk Space:
Deadband Values:
Batch Name:
Batch Definition:
Channels:
MX+B:
Alarms
Configuring NetDAQ Logger for Windows
Default Values
None
Asynchronous
Interval Trigger
1 sec
0.1 sec
Slow (High Res)
Enabled
Disabled
Disabled (Infinite)
Celsius
None
Yes
None
None
Append
None
Rollover on 1000K bytes
All Zero
None (file name is used)
Entire logging session
Channels 1-3: VDC 3V
Channels 4-30: OFF
All Off
All Off
Default Configuration Settings
3
3-35.
3-27