Configuring Alarms
Each channel has two alarms, each of which may be set to HI, LO, or OFF. An
alarm condition occurs when a measurement falls below a low alarm value (LO
alarm) or rises above a high alarm value (HI alarm). NetDAQ Logger records all
alarm conditions in the data file.
If a channel is configured for Mx+B scaling, the instrument will scale the
measurement values before comparing that to the alarm limits.
To configure alarms, complete the following procedure:
1. Select the desired channels and click the Alarms button to open the Alarms
Configuration dialog box.
2. Set each alarm to HI, LO, or OFF and enter alarm values.
Configuring NetDAQ Logger for Windows
Configuring Channels
ds024s.bmp
3-30.
ds025s.bmp
3
3-23