2640A/2645A NetDAQ
Users Manual
Rear Panel Controls
The rear panel has a single control: the power switch (Figure 2-10). The power
switch controls both ac and dc power inputs.
Rear Panel Indicators
The rear panel has three LED indicators for the Ethernet adapter (Figure 2-11).
Red LED blinks for
instrument transmitting
Ethernet data.
2-20
Figure 2-10. Rear Panel Controls
Red LED blinks for instrument
receiving Ethernet data.
XMT RCV
NOT FOR CONNECTION TO
PUBLIC TELEPHONE SYSTEMS
ETHERNET
Figure 2-11. Rear Panel Indicators
Power Switch
Applies AC and/or DC
power to the instrument.
Amber LED for instrument
Ethernet status: 10BaseT, LED
on for connection with hub;
10Base2, LED blinks for data
collisions.
LK
2-23.
2-24.