Settings You Can Change With User Tools; General Features - Savin 4035 Settings Manual

AdonisC3_GBzenF3_FM.book Page 51 Wednesday, February 26, 2003 10:55 AM

Settings You Can Change with User Tools

Reference
To access User Tools, see p.50 "Accessing User Tools (System Settings)".

General Features

❖ ❖ ❖ ❖ Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
❒ Default: ON
❖ ❖ ❖ ❖ Warm Up Notice (copier/Document Server)
Specify whether the beeper sounds when the machine becomes ready for cop-
ying after Energy Saver mode is deactivated or the power is turned on.
Note
❒ If the Panel Tone setting is "OFF", the beeper does not sound, whatever the
Warm Up Notice setting.
❒ Default: ON
❖ ❖ ❖ ❖ Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies remaining to be made (count down).
Note
❒ Default: Up (count up)
❖ ❖ ❖ ❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on or System Reset mode is turned on.
Note
❒ Default: Copier
❖ ❖ ❖ ❖ Print Priority
Print priority is given to the mode selected.
Reference
p.28 "Multi-Access"
Note
❒ Default: Display mode
❒ When "Interleave" is selected, the current print job will be interrupted af-
ter a maximum of five sheets.
Settings You Can Change with User Tools
4
51