Settings You Can Change With The User Tools - Savin 9922 Operating Instructions Manual

Settings You Can Change with the User
Tools
Reference
For how to access the user tools, see
Settings)".
System Settings
Menu
01. Function Priority
02. Panel Tone
03. Copy Count Display The copy counter can be set to show the number of copies
04. System Reset
1
/
5
Description
You can specify the mode to be displayed immediately after
the operation switch is turned on or System Reset mode is
turned on.
Note
Default: Copier
The key tone sounds when a key is pressed.
This tone can be turned on or off.
Note
Default: On
made (count up) or the number of copies remaining to be
made (count down).
Note
Default: Up (count up)
The machine returns to its prioritized mode automatically
after your job is finished, after the selected time. This func-
tion is called "System Reset". The time can be set from 10 to
999 seconds, or no system reset.
Note
Default: On (60 seconds)
You can specify the prioritized mode with the user tools.
See "01. Function Priority" in
"
5

Settings You Can Change with the User Tools

P.14 "Accessing the User Tools (System
P.17 "System Settings
2
1
/
17