Settings You Can Change With The User Tools; General Features - Savin 2335 Manual

AdonisC2-sysEN122F_FM.book Page 34 Thursday, February 1, 2001 1:46 PM
User Tools (System Settings)
Settings You Can Change with the User
Tools
Reference
For how to access the User Tools, ⇒ P.29 "Accessing the User Tools (System Set-
tings)".

General Features

3
❖ ❖ ❖ ❖ Panel Tone
The beeper(key tone)sounds when a key is pressed.
Note
❒ Default: ON
❖ ❖ ❖ ❖ Warm Up Notice
Specify whether the beeper sounds when the machine becomes ready for
copying after Energy Saver mode is deactivated or the power is turned on.
Note
❒ If the "Panel Tone"setting is "Off", the beeper does not sound irrespective
of the "Warm Up Notice"setting.
❒ Default: ON
❖ ❖ ❖ ❖ Copy Count Display
The copy counter can be set to show the number of copies made (count up) or
the number of copies remaining to be made (count down).
Note
❒ Default: Up (count up)
❖ ❖ ❖ ❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on or System Reset mode is turned on.
Note
❒ Default: Copier
❖ ❖ ❖ ❖ Print Priority
Set print priority for each mode.
• "Display mode"
Print priority is given to the mode displayed on the display.
• "Copier"
Print priority is given to the copy function.
• "Document Server"
Print priority is given to the Document server.
34
1
/
2