Table of Contents
Advertisement
AdonisC3_GBzenF3_FM.book Page 57 Wednesday, February 26, 2003 10:55 AM
Timer Settings
❖ ❖ ❖ ❖ Auto Off Timer
The machine turns off automatically to conserve energy after a specified
amount of time has passed following job completion. This function is called
"Auto Off".
The machine status after the Auto Off operation is called "Off mode" or "Sleep
mode". For the Auto Off Timer, specify the time to elapse before the Auto Off
function is activated.
Note
❒ Default: 1 minute(s)
❒ The time can be set from 10 seconds to 240 minutes using the number keys.
❒ When in "Off mode" or "Sleep mode", the machine can be ready for use
within 10 seconds (Type 1), and 15 seconds (Type 2) respectively.
❒ Auto Off may not work when errors are displayed.
❖ ❖ ❖ ❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
❒ Default: 1 minute(s)
❒ Enter a time interval between 10 seconds and 999 seconds using the
number keys.
❖ ❖ ❖ ❖ System Auto Reset Timer
The System Reset setting is a setting that automatically switches to the screen
for the function set in Function Priority. This happens if no operations are per-
formed or when an interrupted job is cleared. This setting sets the system re-
set interval. See p.51 "Function Priority".
Note
❒ Default: Yes, 60 seconds
❒ The time can be set from 10 to 999 seconds in 1 second increments using
the number keys.
❖ ❖ ❖ ❖ Copier/Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier and Document Server modes reset.
Note
❒ If [No] is selected, the machine will not automatically switch to the user
code entry screen.
❒ Default: Yes, 60 seconds
❒ The time can be set from 10 to 999 seconds using the number keys.
Settings You Can Change with User Tools
4
57
Advertisement
Table of Contents
