Accessing User Tools (System Settings); Changing Settings; Exiting From User Tools - Savin 4035 Settings Manual

AdonisC3_GBzenF3_FM.book Page 50 Wednesday, February 26, 2003 10:55 AM
User Tools (System Settings)

Accessing User Tools (System Settings)

This section is for the key operators in
charge of this machine. You can
change or set the machine's default.
Note
❒ Operations for system settings dif-
fer from normal operations. After
using User Tools, be sure to exit.
S e e p . 5 0 " E x i t i n g f r o m U s e r
Tools".
❒ Any changes you make with User
4
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Energy
Saver} } } } or { { { { Clear Modes} } } } key is
pressed.

Changing Settings

Note
❒ If a key operator code has been set,
the key operator code entry dialog
box appears. Enter the key opera-
tor code, and then press [OK]. See
p.59 "Key Operator Code".
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [System Settings].
C C C C
Select the desired menu and press
the desired key.
Reference
p.47 "User Tools Menu (System
Settings)"
50
D D D D
Change settings by following in-
structions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to the main
function menu, press the { { { { User
Tools/Counter} } } } key.

Exiting from User Tools

A A A A
Press the { { { { User Tools/Counter} } } } key.
Note
❒ You can also exit from User
Tools by pressing [Exit].
ZCAS100E
ZCAS100E