Key Operator Tools - Savin 4035 Settings Manual

AdonisC3_GBzenF3_FM.book Page 59 Wednesday, February 26, 2003 10:55 AM

Key Operator Tools

The key operator must set the following items. For settings or more information,
contact the key operator.
The key operator is recommended to program an access code when performing
the settings. See p.59 "Key Operator Code".
❖ ❖ ❖ ❖ User Code Management
Allows you to control who uses the machine by setting codes for users.
User codes must be registered for user code management. See p.67 "User
Code".
Note
❒ Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/OFF
❒ By using Auto Program for the printer, you can keep a print log for each
user code entered from the driver.
❖ ❖ ❖ ❖ Key Counter Management
Use the key counter to specify whether users are limited or not.
Note
❒ Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/OFF
❖ ❖ ❖ ❖ External Charge Unit Management
Use the external charge unit to limit the user's charge and to manage the use.
Note
❒ Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/OFF
❖ ❖ ❖ ❖ Key Operator Code
This specifies whether or not to use passwords (max. 8 digits) to control use
of the Key Operator Tools settings for access codes.
Note
❒ Default: OFF
❒ If you select [ON], enter the access code (max. 8 digits) with the number
keys, and then select [Partial] or [All Initial Settings] to set the access limit.
• If you selected [Partial]
An access code is only required for Timer Setting, Key Operator Tools
for the initial system settings and for Key Operator Tools for the initial
fax settings. [Menu Protect] can be set for [Maintenance] in the initial print-
er settings. If you set [Menu Protect], you can set the key operator code for
part of the initial printer settings. See "Printer Features Parameters",
Printer Reference.
Settings You Can Change with User Tools
4
59