Korg MMT RADIAS Owner's Manual page 41

To enter a drum instrument name, use the Drum Edit mode's P01: NAME page (☞p.111 "P01–2: INST
(Drum Instrument Name)").
• Templates
Template names are displayed when you are loading templates.
You can enter a template name when creating a template in the P16: UTILITY page of the mode in which
you're creating the template (☞p.107 "P16 UTILITY," p.113 "P16 UTILITY").
How to assign a name
Here we will use the example of assigning a name to a program. You can use the same procedure to assign
names other than program names. Before you proceed, use the Program Play mode to select the program
whose name you want to edit.
Using the cursor buttons and the [PROGRAM/VALUE] dial
1
Go to the Program Edit mode P01–1: NAME – PROG
tab page.
2
Use the cursor buttons to move the cursor to the char-
acter you want to change.
3
Use the [PROGRAM/VALUE] dial to choose the
desired character.
4
Repeat steps 2–3 to edit the name of the program.
You can specify a program name of up to twelve characters.
Using the [EDIT/YES] button and the sixteen knobs
With the P01–1: NAME – PROG tab page displayed, you can use the front panel [EDIT/YES] button and the
sixteen knobs to edit the program name as follows.
Hold down the [EDIT/YES] button and turn knobs 1–12 (PORTAMENTO [TIME] – LFO2
[FREQ]) to change the first through twelfth character of the name.
Hold down the [EDIT/YES] button and turn knob 13 (EQ [LO]) to choose uppercase alphabetical
characters for the selected character.
Hold down the [EDIT/YES] button and turn knob 14 (INSERT FX [EDIT1]) to choose lowercase
alphabetical characters for the selected character.
Hold down the [EDIT/YES] button and turn knob 15 (INSERT FX [EDIT2]) to select numerals
for the selected character.
Hold down the [EDIT/YES] button and turn knob 16 (MASTER FX [EDIT]) to select symbols
(including a space) for the selected character.
Deleting a character
1
Use the cursor buttons to move to the character you want to delete.
2
Hold down the [EDIT/YES] button and press the cursor [π/√] button.
The selected character will be deleted.
Inserting a character
1
Use the cursor buttons to move to the location at which you want to inset a character.
2
Hold down the [EDIT/YES] button and press the cursor [†/®] button.
A character will be inserted at the selected location. The inserted character will be the character
that was most recently deleted. The first time you insert, this will be a space.
Basic editing procedure
35