Mac Os X Users - Korg MMT RADIAS Owner's Manual

Synthesizer/vocoder
Hide thumbs Also See for MMT RADIAS:
Table of Contents

Advertisement

11
Driver installation will be completed. Click
[Finish] to exit the installer. If you are asked to
restart Windows, select [Yes] to restart your com-
puter.
Bypassing digital signature authentication dur-
ing driver installation
If your computer is set so that drivers with a digital sig-
nature cannot be installed, you must change this setting
so that the KORG USB-MIDI driver can be installed.
1
From the taskbar, click [Start]➞[Control Panel]
to open the control panel.
From the control panel, start up "System" and
click the [Hardware] tab. Click [Driver Signing].
2
If "What action do you want Windows to take?"
is set to "Block," it will not be possible to install
the driver.
Choose either [Ignore] or [Warn], and then click
[OK]. If necessary, you can set this back to the
original setting after installing the driver.
MIDI driver installation and settings
Uninstalling the KORG USB-MIDI Driver for
Windows XP
1
From the taskbar, select [Start]➞[All Pro-
grams]➞[KORG]➞[KORG USB-MIDI Driver
Tools]➞[Uninstall KORG USB-MIDI Device] to
start up the setup utility. Click [Next>].
2
A list of currently-installed KORG MIDI
devices will appear. Add a check mark only to
the MIDI device(s) you want to remove. Click
[Next>].
Be aware that all MIDI devices with a check mark
will be removed.
3
A confirmation dialog box will appear. Click
[Yes].
4
Click [Finish] to end the procedure. Restart Win-
dows to ensure that the changes have been
applied.

Mac OS X users

Installing the KORG USB-MIDI Driver for Mac
OS X
This driver is only for Mac OS X 10.2 or later.
1
Use a USB cable to connect the RADIAS to your
computer, and turn on the power of the
RADIAS.
2
In the CD-ROM, navigate to the "KORG USB-
MIDI Driver" folder and double-click "KORG
USB-MIDI Driver.pkg" to start up the installer.
3
Depending on the version of your operating sys-
tem, an authentication dialog box may appear. If
so, enter the password and click [OK]. When the
installer starts up, the following screen will
appear. Click [Continue].
153

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Radias

Table of Contents